The sound is a crucial part of the presentation. Movies and video game soundtracks enrich the experience of watching or playing. Without sound, there is no entertainment more on if your projector doesn’t produce sound this thing may annoy you.
In order to get sound to play from a projector, there are a few factors that may be preventing it. There might be a problem with the projector’s settings, a cable or connection issue, or even an audio source problem. Check each of these probable problems and try some fixes in order to get things functioning again so you can hear as well as see the picture from your projector.
As I encountered this situation with my projector as well and going through multiple checks and troubleshooting, finally I was able to solve it. Here, we’ll show you how to get sound to play through a projector. As a bonus, you’ll learn how to fix any audio issues with a projector.
Why does my projector have no sound?
Your projector is now ready to use but NO sound can be heard, despite the image being displayed perfectly. There are a few things you need to do before you get started.
Has there been any improvement in the sound system of your projector? Probably, you may not have a speaker connected to your projector.
Do you have a speaker plugged in?
Determine whether your projector has its own built-in speaker, or whether you’ll need an additional one. There won’t be any sound if there isn’t a speaker. Connecting an external speaker to your projector will most likely solve your problem.
Check Also: Why Is My Projector Not Displaying?
So, How Do I Get Sound To Play Through My Projector?
There are two primary methods for delivering sound to your projector.
1.) Make Sure You’re Connected:
Connect your audio/video source to your projector by unplugging and then re-plugging the cord. To connect your speakers, you’ll need to go through the same process. You won’t be able to hear anything if any of the connectors are loose or not properly placed.
2.) Verify The Type Of Connection:
For audio/video sources like a laptop, you won’t get any sound if you connect them to your projector via the VGA connector (VGA doesn’t allow audio, only video). To connect an audio/video source to your projector you can use a single video or three RGB cables, as long as they are plugged into the projector’s HDMI port.
A separate audio cable, such as an optical audio cable or RCA audio cables, is required when using VGA or RCA cables for video. You must use left and right channel RCA cables to send sound while utilizing RCA connections.
3.) Try Using New Cords:
It’s impossible to acquire sound if the wires you use to connect your audio/video source or projector to your speakers have been broken. When a damaged cable is moved or jiggled, the sound may cut in and out.
4.) Make Sure Your Audio Input Is Working:
If you’re using a PC or laptop with your projector, double-check that the audio output is set to the right source and that the device isn’t muted. Make sure you haven’t muted or turned down the volume of any other devices you’re using to transmit audio and video to your projector.
5.) Check The Volume Of The Projector:
It is possible that you will not be able to hear the speakers if the projector level is too low. If it’s muffled, there’s a high possibility you won’t.
6.) The Projector’s Sound Output Source Should Be Checked:
Make use of the source button, if it’s available, on your projector. Make sure you are using the right process for your projector to assure that the speakers are receiving the correct audio. Try pushing the source button on your projector if it has one. Make sure you are using the right process for your projector to assure that the speakers are receiving the correct audio signal.
7.) Make Sure The Speaker’s Volume Is Turned On:
Check the level of your sound bar, receiver, or amplifier if you’re using one of these. Everything should also be turned on. Also, check sure the speakers are working by connecting any additional audio sources you might have.
8.) Check The Speaker’s Input Settings:
Make sure you connected the audio input with your projector if you’re using a sound bar or receiver with numerous audio inputs. If at all feasible, plug your projector into a separate one and switch to that.
Make sure you have the latest software updates
There may be app upgrades available if you’re using an app on your projector or a device like a Fire Stick or Roku. problems might arise if the app isn’t up to date.
9.) Wireless Interference Should Be Checked:
If you’re using Bluetooth or Wi-Fi to connect to the speakers, eliminate any potential interference. Verify that the speakers and projector are connected by bringing them closer together if feasible.
Check Also : How To Hang A Projector Screen From A Drop Ceiling?